Product Code: EZRUN MAX10 COMBO (2-3S)
Brand: Hobbywing
Product Condition: New
Units in Stock: 0
Product out of stock (Notify me when product is back in stock)

1/10th Buggy, On-road, and Light-weight 2WD SCT, Truck & Monster Truck


What's in the box? 
  • ESC is compatible with both sensorless and sensored brushless motors (only in sensorless mode).
  • Fully waterproof design for all conditions.
  • Super internal switch-mode BEC with switchable voltage of 6V/7.4V for usage with high torque and high voltage servos.
  • Motor Thermal Protection: It will be available after you plug the temperature monitoring cable on the ESC into the temperature monitoring port (marked with “TEMP”) at the bottom of the matching HOBBYWING motor.
  • Highly reliable electronic switch design prevent mechanical switch failure due to dirt, water, dust and etc.
  • Separate programming port to easily connect the LED program card or the LCD program box to the ESC.
  • Proportional brake with 9 levels of maximum brake force and drag brake force.
  • 5 levels of acceleration/punch from soft to aggressive for different vehicles, tires and tracks.
  • Capacitor Protection:Innovative Capacitor Protection effectively protects capacitors from exploding and causing irreversible damage to the ESC from overloading. • Multiple protections: motor lock-up protection, low-voltage cutoff protection, thermal protection, overload protection, and fail safe (throttle signal loss protection). • Single-button ESC programming and factory reset.
  • Advanced programming via portable LED program card, multifunction LCD program box or WiFi module.
  • Firmware upgrade via HOBBYWING multifunction LCD program box or WiFi module (item sold separately).
Scale Vehicles 1/10th
60A / 450A
Motor Mode Sensorless
Input 6-9 Cell NiMH
2-3S LiPo  
Motor Limit 2S LiPo/ 6S NiMH: KV≤6000  
3S LiPo/ 9S NiMH: KV≤4000 
(3652 size motor)
BEC Output 6V/7.4V Switchable, Continuous Current of 3A (Switch-mode)
ESC Programming Same
Switch Mode Same
Waterproof Yes
Size (L.W.H)

1/10thTouring / Buggy 
thlight-duty 2WD Short-course Truck / truck/ monster truck

  • Innovative 4-pole-8-magnet "staggered pole" rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners.
  • Built-in temperature sensor and sensor port protect the motor from damage due to overheat when pairing EZRUN 3652 G2 with a EZRUN MAX10 ESC.
  • O-ring seal fitted between the front end bell and motor case isolates screw holes from inner parts to prevent liquid or dust from getting inside and protect motor from damage.
  • Special design implemented by the motor case (the end attaches to the front end bell) isolates inner coils from outside to protect winding from being damaged by overlong screws.
  • Special technology for temperature control implemented by this motor guarantees less heat more efficiency (efficiency rate of up to 90%).
  • CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness.
  • Rebuild-able design (partially rebuild-able) for routine maintenance effectively prolongs the motor life and raises the motor efficiency.
  • Excellent match between EZRUN 3652 G2 with EZRUN MAX10 guarantees users large torque plus a very smooth and linear power band.


EZRUN 3652 SL Brushless G2 motor

Ezrun Series 3652 SL G2 3652 SL G2 3652 SL G2
KV 3300 4000 5400
P/n 30402600 30402601 30402602
LiPo 2-3S 2-3S 2S
R. (Ω) 0.0083 0.0060 0.0053
4.3A 5.2A 7.2A
Timing (deg.) 0 0 0
Motor Diameter
& Length
Φ=36 / L=52 Φ=36 / L=52 Φ=36 / L=52
Shaft Diameter
& Length
Φ=5 / L=18.5 Φ=5 / L=18.5 Φ=5 / L=18.5
Pole 4 4 4
Weight (g) 218 216 217


FDR: Gear Ratio:
Its important to select the FDR/gear ratio properly, as improper FDR/gear ratio may cause you great loss. Therefore, please choose the gear ratio by referring to the following points!
  1. Operating Temperature of the Motor The motor temperature should be lower than 100℃ (212℉) during the operation. Temperatures above 100℃ will weaken the magnet and may partly melt the coils and eventually damage the ESC (because of strong current). Therefore, the most effective way to prevent overheat is to select the right gear ratio. Note: We recommend enabling the Motor Thermal Protection (on the ESC) when you are pairing the motor with a HOBBYWING EZRUN MAX10/MAX10-SCT ESC.
  2. Principle of Gear Ratio Selection To avoid potential risks such as ESC/motor damage or malfunction caused by overheat, please start with a very small pinion first and check the ESC & motor temperatures regularly throughout the run. This is the only way to guarantee that your motor wont overheat. If the motor and ESC temperatures remain stable and low in the running, then you can slowly increase the pinion size while monitoring temperatures to determine the safe gearing for your vehicle, climate and track condition. Because these elements may change, so please keep monitoring the ESC & motor temperatures to protect your electronics from damage.

$94.99 inc. tax

$94.99 ex. tax
? Tax based on United States.

Customer Reviews

No Reviews Posted Yet - be the first! (write review)

Product Added to your Cart

-------- OR --------